TripleCrown is a water-based cleaner that cleans and etches concrete in one simple step. It also cleans pavers and brick.
Apply with low-pressure, hand pump sprayer
Allow to work on the surface for 2-4 hours. Allow longer time for stubborn stains.
Rinse with pressure, using an abundance of water if around vegetation.
One gallon container. Treats approx. 230-250 square feet.
The Best Concrete Cleaner Available.
SealBack Nano-Particle Clear Sealer – The First Self-Cleaning Sealer!
Protection from UV
SealBack’s proprietary formula blocks UV and preserves the beauty of what it’s protecting. It’s also resistant to yellowing, which often happens to other sealers.
Self-Cleaning SealBack’s chemistry modifies the surface to which it’s applied and prevents airborne dirt and dust particles (caused by lawn mowers, wind, etc.) from attaching. With each rainfall, the surface is cleansed.
Easy to Apply Sealback’s water-based chemistry is designed to penetrate into porous substrates and provide years of protection against the sun and rain. SealBack will dry within minutes allowing a second coat (if desired) to be applied.
Ipe, Mahogany, and other hardwood decking and vertical surfaces
Treated lumber decking
Masonry surfaces (horizontal or vertical)
Spanish tile roofing
Fiberglass and wood doors
Wood and synthetic siding
MiracleMist Long-Term Protectant Against Mold, Mildew, & Algae Stains
Once your surface is clean from mold, mildew, and algae stains, protect the surface with MiracleMist Long-Term Protectant!
Creates an environment where fungus and bacteria don’t want to grow.
No mold. No stains! No bacteria. No odors!
One application can last for up to three years!
Coverage: 100-500 square feet depending on substrate and application method.
Pretreat – Adhesive Penetrant For Wood
Pretreat is highly recommended for wood that has not been adequately maintained and is exhibiting signs of checking or splitting.
Ensure the success of your Encore deck project with Pretreat, an adhesive primer that is designed specifically for Encore!
Penetrates deep into old, dry decking and creates a sub-surface bond for the Encore coating.
This sub-surface bond creates unbelievable adhesive properties to help insure a lasting job.
In most cases, Pretreat also extends the coverage of an Encore kit, helping to offset its cost!
Pretreat is available in 1 gallon quantities.
Pretreat is a water-thin blend of proprietary micro-resins that is sprayed through a conventional pump up sprayer onto wood decks. Decks that are treated with Pretreat prior to being coated with Encore will last longer because Pretreat helps to fix the dimensional stability of the wood. Expansion and contraction is what causes wood to deteoriate. Fix the dimensional stability, and both the structure and the coating will last longer.
Encore - A Self-Repairing Wood & Concrete Deck Coating
Activated by water, fully repairing small holes, cracks, and tears within 7-12 days of a rainfall.
Coverage: 400 sq. ft. – 1 coat. Coats required: 2
Limitless Color Tinting
The Deck Coating that Responds to its Environment
Imagine a coating that would actually get better with each rainfall, instead of worse. Well, now there is one. Encore’s intelligent, self-repairing formula is activated by water, fully repairing small holes, cracks, and tears within 7-12 days of a rainfall. This capability prevents moisture intrusion, the cause of most coating failures. And yes, we absolutely guarantee it.
Once & Done
When other deck resurfacing products are in the process of failing from moisture intrusion, Encore’s self-repairing technology locks out moisture and waits behind the scenes to provide the protection needed for years of reliability.
Available colors: ENCORE TINTS TO ANY COLOR BY ADDING ONE GALLON OF MID-PRICED EXTERIOR ACRYLIC PAINT (SATIN OR SEMI-GLOSS) TO THE ENCORE KIT. DO NOT USE COMBINED “PAINT-&-PRIMER” PRODUCTS WITH THIS PRODUCT.
* Do not use a paint that contains primer.
LUMEN Paint Additive
End Paint Maintenance When You Create A Lifetime Paint.
Simple to use. Simply add this one quart of LUMEN to a gallon of acrylic/latex paint, blend, and apply.
LUMEN will not change the color of the paint, but changes everything else about it.
LUMEN turns ordinary latex paint into an elastomeric coating that can expand and contract with the siding on your home,
Adds years of life to the paint.
Improves color stability, so paint doesn’t fade nearly as fast.
Simply add one quart of LUMEN to a gallon of water-based (acrylic/latex) paint, mix, and apply. The result will be a long-lasting elastomeric coating that expands and contracts with your home’s siding for years. Based on our testing, LUMEN can increase the elasticity of paint between 400 & 700%. Since no siding material moves to this extent, LUMEN is never pushed to its “snapping point”. In the years that we’ve been selling this “super-additive”, we’ve never had a warranty claim, a product return, or a single complaint. In fact, customers send us their positive comments and photos of their work. LUMEN has been a pure joy to sell!
The Most Affordable Instant Mold & Mildew Stain Remover
Remove mold, mildew, and algae stains from:
Siding of all types
Roofing of all types, including asphalt shingle roofing
Exterior porches, gables, etc.
Decks of all types
Showers, shower curtains, and tubs
Interior walls and ceilings (great for mold remediation projects)
and many other uses!
Prevent Mold & Mildew Stains from Coming Back.
Once the surface is clean, protect it and keep mold and mildew stains from returning by treating the surface with MiracleMist Long-Term Protectant. One application can keep mold and mildew stains away for up to three years! Great on interior and exterior applications.