Additional information
Weight | 27 lbs |
---|---|
Dimensions | 12 × 12 × 14 in |
$500.00 + Taxes
AQURON® MVB™ is an amber colored milky aqueous dispersion liquid that when applied properly to Portland cement concrete, will penetrate sealing the concrete’s surface. AQURON® MVB™ forms a clear to milky film surface depending on the concrete’s density and surface finish that is durable and tenacious in adhering to concrete’s surface.
We’ve always struggled with maintaining the integrity of our concrete over time, but since using this treatment from Encore Coatings, the difference has been remarkable. It densifies and strengthens concrete, reducing permeability and porosity, which has drastically improved the overall performance.
– R. Bettings
AQURON® MVB™ is an amber colored milky aqueous dispersion liquid that when applied properly to Portland cement concrete, will penetrate sealing the concrete’s surface.
AQURON® MVB™ forms a clear to milky film surface depending on the concrete’s density andsurface finish that is durable and tenacious in adhering to concrete’s surface.
AQURON® MVB™ is a single application product, that is a permanent moisture vapor blocker that can help reduce moisture vapor transmission to below the threshold levels established by coatings and topical manufacturers.
When properly applied AQURON® MVB™ will reduce moisture vapor emissions rate from 6 to 3 pounds or less in approximately 24 hours. Where emission rates are higher than 6 pounds, a pretreatmentwith AQURON® CPT-2000™ is required. (Consult with Aquron’s Technical Department.) (It is suggested that ASTM 1869 calcium chloride test be used to establish final moisture content.)
AQURON® MVB™ also densifies, strengthens and adds abrasion resistance to the surface ofconcrete, forming a non-tacky surface when dry.
AQURON® MVB™ is a single-application moisture vapor blocker that serves as an effective primer for coatings. It forms a clear to milky film on the surface, depending on the concrete’s density and finish, providing a durable and strong bond that significantly reduces moisture-vapor transmission to levels below the thresholds set by most coating and topical manufacturers. When properly applied, AQURON® MVB™ lowers the moisture-vapor emission rate from 6 pounds to 3 pounds or less within 24 hours. In addition to its moisture-blocking properties, AQURON® MVB™ densifies, strengthens, and enhances the abrasion resistance of concrete, creating a non-tacky surface when dry. This product permanently seals concrete, making it an excellent primer for coatings while also improving thermal resistance. However, AQURON® MVB™ should not be used in direct contact with solvent-based adhesives or coatings. To use with such materials, a 100% solids water-based primer must be applied over the MVB before the solvent-based coatings. After applying AQURON® MVB™, it is recommended to wait at least 24 hours before applying any impervious coatings or coverings.
Weight | 27 lbs |
---|---|
Dimensions | 12 × 12 × 14 in |
CONTACT INFORMATION
SHOP
COMPANY
Buy 3, Get 4th Free
Only applies to Cool! Project Bundles.
Cannot be used with other coupons.
Limit 2 bundles per customer
FREE SHIPPING - Use Code FALL24
Inventory Reduction Sale
Coupon code will automatically add FREE bundle to your cart!
While Supplies Last!
Reviews
There are no reviews yet.