The Complete Treatment that removes black mold & mildew stains and keeps them from coming back!
Save when you buy a combo-pack!
MiracleMist is the first “system” that instantly removes mold, mildew, and algae stains from surfaces and protects against their return! The process is easier than you think.
Begin your project by instantly removing stains with MiracleMist’s Instant Mold & Mildew Stain Remover. Then rinse and allow to dry. The final step is applying MiracleMist’s Long-term Protectant. One application of protectant can keep stains away for up to three years! It really is that easy.
Follow instructions provided below and on the label.
The System That Cleans Mold & Mildew and Keeps it Away for Years!
Getting the edge on mold and mildew doesn’t have to be that hard! Why spend hundreds of dollars on pressure washers and countless hours of time each year dealing with the stains caused by mold, mildew, and algae? Here’s an EFFORTLESS way to clean stains AND prevent those nasty stains from recurring!
A Pro-Grade System that takes the work out of cleaning mold, mildew, & algae.
The MiracleMist System is as easy as it gets! The MiracleMist System includes an Instant Cleaner that really is instant. Mold, mildew, algae, dirt, and grime are removed inside of one minute – without scrubbing or pressure washing! The final step is to apply the MiracleMist Long-term Protectant to prevent the recurrence of stains caused by mold, mildew, and algae. One application can last for up to 3 years!
Remove mold, mildew, and algae from:
House siding of all types
Painted surfaces of all types (does not harm paint)
Roofing of all types, including asphalt shingle roofing
Exterior porches, gables, etc.
Fencing of all types
Decks of all types, including Ipe and composite decking
Use the Long-term Protectant (LTP) to keep stains off of:
Siding of all types
Roofing of all types
Wood decks & fences
All interior surfaces of boats, RVs, trailers, etc.
Interior walls and ceilings
Outdoor furniture, including fabric pillows, cushions, etc.
Showers, shower curtains, and tubs
Gym bags, shoes, lockers, etc.
and hundreds of other surfaces!
MiracleMist LTP creates a safe, invisible film that keeps nasty, unsightly stains away. Depending on the application, one treatment can last for up to three years. Here are a few examples of the performance you can expect:
Vertical House Siding – 2-3 years.
Roofing – 1 year or more.
Exterior fabrics – 2-3 years.
Floors, including decks – up to 2 years.
Interior walls, ceilings – 3+ years
Need the Long-term Protectant in a larger size?Click here!
Application & Use:
Removing mold, mildew, and algae from exterior surfaces:
NOTE: Follow all product instructions. Do not use Instant Cleaner on outdoor fabrics without first trying it in an inconspicuous area as it will bleach some fabrics.
While MiracleMist Instant Cleaner contains less bleach than ordinary household bleach, always pre-wet area vegetation with water prior to application. Then, once you’ve applied the cleaner, rinse the vegetation again. This will help protect the vegetation.
Using a pump sprayer, evenly apply MiracleMist Instant Cleaner to the surface. The surface will immediately begin to show signs of cleaning and restoration. Allow enough dwell time for MiracleMist Instant Cleaner to fully clean the surface (30 seconds to 3 minutes depending on the level of severity). Rinse thoroughly and allow to dry.
Using a clean pump sprayer* or fogger, apply MiracleMist Long-term Protectant evenly across the dry surface. Saturate fabrics in order to completely treat deep fiber areas. Allow to dry. Do not apply Protectant within four hours of expected rainfall.
Removing mold, mildew, and algae from interior surfaces:
NOTE: Avoid possible bleaching of fabrics by covering or otherwise protecting fabrics from overspray or spills. This product will produce a bleach smell that could be strong in enclosed environments. Avoid overexposure and possible reaction to fumes by wearing a basic safety mask and take frequent breaks if you feel it is necessary.
Cleaning low build-up and light to moderate staining:
Using a pump sprayer, evenly apply MiracleMist Instant Cleaner to the surface. The surface will immediately begin to show signs of cleaning and restoration. No rinsing is necessary. Most surfaces will be clean within one minute and no further cleaning is required. Allow the surface to dry for a minimum of 48 hours before applying the Long-term Protectant.
Cleaning moderate to high-build contamination and staining:
Consult with a mold professional on the best method for removing the buildup. Once the area has been properly remediated, remove staining by applying an even coat of MiracleMist Instant Cleaner to the surface. Stains will disappear within one minute and no further cleaning is required. Allow the surface to dry for a minimum of 48 hours before applying the Long-term Protectant.
Using a clean pump sprayer* or fogger, apply MiracleMist Long-term Protectant evenly across the surface. Saturate fabrics in order to completely treat deep fiber areas. Allow to dry.
*If using the same sprayer that was used to apply the Cleaner, completely rinse the cleaner and run at least one gallon of clean water through the sprayer before using it to apply the Protectant.
Your Satisfaction Guaranteed.
Here’s our deal: If you’ve used MiracleMist for one of our published applications and aren’t 100% thrilled with the outcome of your cleaning project or the resilient protection thereafter, contact us and we’ll either send you replacement product or refund your purchase.