pilings

21POLYPLUS

21POLYPLUS is a proprietary blend of resins and organic chemistry designed for application on marine piling and wale systems. 21POLYPLUS dries fast and creates a durable, monolithic coating on wood. It has been proven to encapsulate CCA, a preservative that has been found to be harmful to humans and the environment. 21POLYPLUS also provides protection against marine borers, which can destroy wooden marine structures within a few short years. All of this protection is provided through a water-based, environmentally-friendly chemistry that you can feel good about using.

21POLYPLUS can be installed by a dealer/applicator or onsite by the contractor. Cuts made to the wood is easily patched and steel fasteners protected with 21POLYPLUS experience a substantially increased service life.

21POLYPLUS is a durable coating that imparts a monolitic finish on marine piles.
Proven to encapsulate the preservatives used in pressure treating marine piles and prevent marine borer attack.

Add 1/2 gallon of latex paint (of your color choice) to the 21POLYPLUS kit, mix, and roll onto marine piling and wale systems. 21POLYPLUS dries in minutes. Coated parts can be installed 48 hours later. Cuts made to parts are easily patched on site, making 21POLYPLUS both the convenient and obvious choice for protecting the environment and extending the life of marine structures. Reseal the contents of an activated kit. Typical shelf life of activated kit is one week.

Application Requirement: 2 coats totaling 14-17 dry mils.

Coverage: Approximately 140-180 sq. ft. (Actual coverage depends on substrate conditions and application technique.)

Share on FacebookTweet about this on TwitterPin on PinterestEmail this to someone